The construction steps of fireproof coatings are usually as follows: 1. Surface preparation: First of all, clean and treat the surface to be coated to ensure that the surface is free of oil, dust or other pollutants. If there is rust on the surface, it also needs to be removed.2. Primer coating: After the surface preparation is completed, apply a special fireproof primer. The selection of primer should meet the required fire protection standards and be constructed in accordance with the manufacturer's recommendations.
The construction of fireproof coatings for steel structures involves several key steps to ensure the application is effective and meets safety standards. Here are the general guidelines for the construction of fireproof coatings on steel structures: 1. Surface Preparation: The steel surface should be cleaned thoroughly to remove dirt, rust, oil, and other contaminants. This may involve abrasive blasting, power tool cleaning, or other approved methods to achieve the required surface cleanliness and roughness.
